GAM G1002 C2024-03-26T15:11:55-04:00

Who is it made for?

  • Telecommunication Companies

  • Municipalities and Co-ops

  • Internet Service Providers and Wireless ISPs

  • Property Managers

  • Cable Operators and MSOs


  • Can serve up to 384 subscribers with up to 16 subscribers per port.

  • Easy installation that avoids costly delays and renovations associated with installing fiber cables.

  • Uses existing wiring infrastructure to deliver high-speed gigabit services.

  • Compliant Residential Gateways with built-in client support or with SFP ports are also fully supported.

  • Optimizes the bandwidth for each subscriber based on the real-time condition.

  • Self-Installation and Zero-Touch Provisioning. 

How It Works:
Positron to Ethernet Managed Demarcation Point

“Fiber to the Home” is far from the only and most efficient technology to deliver Gigabit Internet access to subscribers. Retrofitting an existing (brownfield) Multi-Dwelling Unit (MDU) with fiber is complex and expensive. The G1002-C / G1002-C+ series of to Ethernet adapter complement the popular G1001 series with support for two (2) Gigabit Ethernet ports with one of the ports providing power to Ethernet devices as per the 802.3af / 802.3at standards (G1002-C+).


The G1002 series supports the ITU-T G.9960 Wave-2 standard and is designed to operate over the existing
telephone wiring (UTP, CAT-3 or CAT-5/5e) or coaxial cabling and deliver a Gigabit Internet service to each subscriber
at a lower cost and without the complexity and delays associated with in-building fiber installation. is used as an Access technology by Operators looking to simplify their access network and backend infrastructure with an Ethernet-like technology that is highly scalable without some of the inherent complexity of DSL-related technologies. With as the Access technology, Operators deliver advanced services such as Gigabit High Speed Residential Internet and

About the G1002 Series Managed Demarcation Point with POE / POE+ support

The G1002 series terminates the link under the control of the Positron GAM, making sure the information transmitted over the links is protected with strong AES-128 encryption. It offers comprehensive VLAN support as per the IEEE 802.1q standard and the VLAN mode of each port is individually con gurable: Trunk, Access or Untagged.

The G1002-C+ further add support on GigE port #1 for Power over Ethernet (POE or POE+) as per the IEEE 802.3at standard (30W) to devices such as Wi-Fi Access Points, IP Camera or Residential Gateways (RG).

Consult our Tech Sheet for more information

    Get Started on The Right Solution Now. Speak to a Positron Representative Today!

    Resources and CATV Coexistence – MDU Gigabit Speeds Without Compromise

    For carriers seeking to expedite their broadband deployment in underserved areas, the prospect of an in-building fiber installation for high-speed broadband is a daunting challenge. Fortunately, Positron’s Access Multiplexer (GAM) technology makes it possible to leverage a non-blocking CE 2.0 Carrier Ethernet Core to reliably deliver managed Gigabit services over existing infrastructure.

    Extending Gigabit Fiber services to Every Door without installing fiber to the door

    Positron’s Access Multiplexer (GAM) can extend your fiber services to every door of an MDU/MTU over the existing telephone pairs or coaxial cable to deliver Gigabit broadband. The Positron GAM delivers symmetrical Gigabit broadband without the need to install fiber to every door.

    Go to Top