How it works
The GAM 12M for Copper is designed to optimize coverage over your existing wiring infrastructure to avoid the high cost of installing new fiber. High-speed Gigabit Internet Services are more stable, which reduces support calls and customer churn. The GAM software extends its management capabilities to the G.hn end-point (aka G.hn to Ethernet Bridge) devices. The GAM hardware enforces per-subscriber bandwidth profiles and guarantees a fair and balanced use of the backhaul link at all times for value-added services such as IPTV, streaming and telephony. Its extensive support for VLAN (including Q-in-Q) allows for seamless integration with the operator fiber services and the OSS and BSS functions already in place. The service OAM capabilities of the GAM provide real-time information to the operator about the overall grade of services without any additional cost or complexity.
G.hn is a Proven Carrier-Grade Access Technology
G.hn is widely used by large Operators in multiple markets where it provides Gigabit services into MDU of all sizes as well as for residential neighborhoods. These Operators leverage the robustness of G.hn and its predictable bandwidth to scale to large deployments that complement their investment in their PON infrastructure.
As is the case with other ITU DSL and PON standards, G.hn offers extensive management and troubleshooting features and capabilities to simplify its deployment, activation and support. These management capabilities cover all operational aspects, from dealing with wiring issues to service-aware QoS and bandwidth management. The G.hn ecosystem is very solid and includes verified interoperability between the three (3) main chipset vendors based on extensive testing by the University of New Hampshire (UNH) lab.
About the Positron G.hn Access Multiplexer (GAM)
The Positron GAM leverages a non-blocking CE 2.0 Carrier Ethernet Core ASIC to reliably deliver managed Gigabit services. The GAM is a Fiber to the Distribution Point (FTTDp) solution that is typically installed inside a wiring closet. Each GAM comes with two (2) 10 Gigabit SFP+ interfaces to support any type of fiber or PON standards (using an ONT as required). These SFP+ ports are also used to support additional GAM devices in medium to large MDUs and share the fiber backhaul link.
G.hn Delivers Superior Bandwidth
G.hn consistently delivers superior bandwidth over twisted pair wire and coaxial cable. G.hn dynamically adjusts the allocation of the bandwidth between the downstream and upstream direction to reflect the real-time traffic conditions for optimal and near-symmetrical performance under all conditions.
With the Positron GAM, high-speed Gigabit Internet Services are more stable, reducing support calls and customer churn. The GAM software extends its management capabilities to the G.hn end-point (aka G.hn to Ethernet Bridge) devices (such as the Positron G1001). The GAM hardware enforces per-subscriber bandwidth profiles and guarantees a fair and balanced use of the backhaul link at all times for value-added services such as IPTV, streaming and telephony. Its extensive support for VLAN (including Q-in-Q) allows for seamless integration with the operator fiber services and the OSS and BSS functions already in place. The service OAM capabilities of the GAM provide real-time information to the operator about the overall grade of services without any additional cost or complexity.
With hardware-assisted synchronization to improve the efficiency of Vectoring, the GAM optimizes the bandwidth for each subscriber based on the real-time condition.
The Positron GAM is available in 24 and 12 port configurations for either coaxial cable or twisted pair with support for Single Input Single Output (SISO) mode, (1 pair per port) and Multiple Input Multiple Output (MIMO) mode (2 pairs per port). Using MIMO instead of DSL pair bonding means that there is no need to allocate two (2) ports to serve a single subscriber, lowering costs and avoiding the complexity of pair bonding.
Deploying the GAM in an MDU / MTU
The GAM is designed to optimize coverage in an MDU / MTU over the existing wiring infrastructure to avoid the high cost of installing new fiber inside these buildings. While operation over twisted-pair wiring is always Point-topoint, operation over a coaxial cabling infrastructure can be Point-to-Multipoint using standard coax splitters. In this mode, a 24-port GAM can serve up to 384 G.hn subscribers with up to 16 subscribers per port. The GAM terminates the links with a G.hn client device such as the Positron G1001-M or G1001-C managed end-points from Positron. Compliant Residential Gateways with built-in G.hn client support or with SFP ports are also fully supported.
The Positron GAM takes advantage of Positron’s SDN-ready VIRTUOSO software Domain Controller to control and manage GAM devices. VIRTUOSO presents a native management interface to the existing OSS and BSS systems of operators. VIRTUOSO can operate either as a standalone management plane server or under the control of standard-based Orchestration Platforms such as Open Daylight and others.
When interfacing with an ILEC/CLEC, the VIRTUOSO Domain Controller handles the management of the G.hn endnode served by a GAM. The OLT and Aggregation Router transparently handle Internet traffic with a single or double VLAN tag per subscriber.
Get Started on The Right Solution Now. Speak to a Positron Representative Today!
Resources
Accelerating Digital Equity Nationwide
High speed broadband access is now more than ever a fundamental need for remote learning and tele-working, video streaming, entertainment and video conferencing especially with multiple users in the same household.
GAM Solution Brief
Positron’s G.hn technology provides managed non-blocking symmetrical Gigabit bandwidth services to subscribers over existing telephone wire or coaxial cable on extended distances, at a lower cost and with reduced complexity compared with G.fast.
G.hn and CATV Coexistence – MDU Gigabit Speeds Without Compromise
For carriers seeking to expedite their broadband deployment in underserved areas, the prospect of an in-building fiber installation for high-speed broadband is a daunting challenge. Fortunately, Positron’s G.hn Access Multiplexer (GAM) technology makes it possible to leverage a non-blocking CE 2.0 Carrier Ethernet Core to reliably deliver managed Gigabit services over existing infrastructure.
Extending Gigabit Fiber services to Every Door without installing fiber to the door
Positron’s G.hn Access Multiplexer (GAM) can extend your fiber services to every door of an MDU/MTU over the existing telephone pairs or coaxial cable to deliver Gigabit broadband. The Positron GAM delivers symmetrical Gigabit broadband without the need to install fiber to every door.