How It Works:
Line Powered G.hn to Ethernet Ethernet Endpoint with POE/POE+
“Fiber to the Home” is far from the only and most efficient technology to deliver Gigabit Internet access to subscribers. Retrofitting an existing (brownfield) Multi-Dwelling Unit (MDU) with fiber is complex and expensive. The G2002 series of G.hn to Ethernet Endpoint is line-powered from the Positron G.hn Access Multiplexer (GAM) and complements the popular G1001 and G1002 series with support for two (2) Gigabit Ethernet ports with one of the ports providing power to Ethernet devices as per the 802.3af / 802.3at standards.
With the G2002-M+ and line power from the GAM, you can now combine G.hn over copper to build whole-MDU Wi-Fi coverage with seamless roaming in a very flexible approch. This allows Operators to install and control the Wi-Fi infrastructure using their preferred Wi-Fi vendor.
Introducing G.hn
The G2002-M+ supports the ITU-T G.9960 G.hn Wave-2 standard and is designed to operate over the existing telephone wiring (UTP, CAT-3 or CAT-5/5e) and deliver a Gigabit Internet service to each subscriber at a lower cost and without the complexity
and delays associated with in-building fiber installation. G.hn is used as an Access technology by Operators looking to simplify their access network and backend infrastructure with an Ethernet-like technology that is highly scalable without some of the inherent complexity of DSL-related technologies. With G.hn as the Access technology, Operators deliver advanced services such as Gigabit Residential Internet and 4K IPTV.
About the G2002-M+ Managed Demarcation Point with POE / POE+ support
About the G2002-M+ Managed Demarcation Point with POE / POE+ support
The G2002-M+ terminates the G.hn link under the control of the Positron GAM. It makes sure the information transmitted over the G.hn links is protected with strong AES-128 encryption. It offers comprehensive VLAN support as per the IEEE 802.1q standard and the VLAN mode of each port is individually con gurable: Trunk, Access or Untagged.
The G2002-M+ operates over twisted pair, is managed by the GAM and provides Power over Ethernet (POE or POE+) to devices such as Wi-Fi Access Points, IP Cameras or Residential Gateways (RG).
Get Started on The Right Solution Now. Speak to a Positron Representative Today!
Resources
Accelerating Digital Equity Nationwide
High speed broadband access is now more than ever a fundamental need for remote learning and tele-working, video streaming, entertainment and video conferencing especially with multiple users in the same household.
GAM Solution Brief
Positron’s G.hn technology provides managed non-blocking symmetrical Gigabit bandwidth services to subscribers over existing telephone wire or coaxial cable on extended distances, at a lower cost and with reduced complexity compared with G.fast.
G.hn and CATV Coexistence – MDU Gigabit Speeds Without Compromise
For carriers seeking to expedite their broadband deployment in underserved areas, the prospect of an in-building fiber installation for high-speed broadband is a daunting challenge. Fortunately, Positron’s G.hn Access Multiplexer (GAM) technology makes it possible to leverage a non-blocking CE 2.0 Carrier Ethernet Core to reliably deliver managed Gigabit services over existing infrastructure.
Extending Gigabit Fiber services to Every Door without installing fiber to the door
Positron’s G.hn Access Multiplexer (GAM) can extend your fiber services to every door of an MDU/MTU over the existing telephone pairs or coaxial cable to deliver Gigabit broadband. The Positron GAM delivers symmetrical Gigabit broadband without the need to install fiber to every door.