GAM G1000 M2021-01-26T13:01:28-05:00

Who is it made for?

  • Telecommunication Companies

  • Municipalities and Co-ops

  • Internet Service Providers and Wireless ISPs

  • Property Managers

  • Cable Operators and MSOs


  • Easy installation that avoids costly delays and renovations associated with installing fiber cables.

  • Used in Conjunction with the Positron GAM 12M and 24M

  • Uses existing wiring infrastructure to deliver high-speed gigabit services.

  • Compliant Residential Gateways with built-in client support or with SFP ports are also fully supported.

  • Optimizes the bandwidth for each subscriber based on the real-time condition.

  • Self-Installation and Zero-Touch Provisioning. 

How it works

The ITU-T G.9960 Wave-2 standard is designed to leverage the existing telephone copper wiring (UTP, CAT-3 or CAT-5/5e) with an access technology that delivers a Gigabit Internet service to each subscriber at a lower cost and without the cost, complexity and delays associated with in-building fiber installation. is used as an Access technology by Operators looking to simplify their access network and backend infrastructure with an Ethernet-like technology that is highly scalable without some of the inherent complexity of DSL-related technologies. With as the Access technology, Operators deliver advanced services such as Gigabit High Speed Residential Internet and 4K IPTV without the high capital and operational expenses associated to a fiber retrofit. The Positron GAM solution is MEF CE 2.0 compliant and is ideally suited to deliver Business Ethernet services in an MDU and/or MTU deployment.

About the G1000 Managed Demarcation Point

The Positron to Ethernet Bridge (G1000-M for twisted pair) is a Managed Demarcation Point acting as a Virtual CPE (vCPE) that can be used to connect to a Residential Gateway (RG) that does not have native support for on its WAN port.

The G1000-M and G1000-C devices are used to control how a Residential Gateway (or User CPE) connects to the Access Network under the control of the Positron GAM. In this role, they make sure the information transmitted over the links is protected with strong AES-128 encryption.

Since the Access Network operates at layer-2 (same as Gigabit Ethernet and GPON), the G1000-M and G1000-C can operate under a virtual CPE (vCPE) mode when Operators rely on a Virtualized Network Function (VNF) architecture where services such as IP Routing and Firewall are handled by servers in the “cloud”.

positron mdu twisted pair infrastructure

Consult our Tech Sheet for more detailed
information and Comparisons

    Get Started on The Right Solution Now. Speak to a Positron Representative Today!


    Extending Gigabit Fiber services to Every Door without installing fiber to the door

    Positron’s Access Multiplexer (GAM) can extend your fiber services to every door of an MDU/MTU over the existing telephone pairs or coaxial cable to deliver Gigabit broadband. The Positron GAM delivers symmetrical Gigabit broadband without the need to install fiber to every door.

    Go to Top